Audiolab 6000N Silver
€549.00*
On order - delivery time on request (usually approx. 14 days)**
Buy together with
Product information "Audiolab 6000N Silver"
The audiolab 6000N Play is a wireless audio streaming player and is the latest member of the acclaimed audiolab 6000 Series of components.
Featuring DTS Play-Fi® Technology, music can be streamed over your wireless network in high-resolution format and can be easily expanded to a multi-room system if required. You can stream from any source on your wireless network, including smart-phones, tablets or PCs as well as a NAS Drive.
The sound of science
Outwardly, the 6000A bears strong resemblance to the 8300A with its rotary controls and large, central OLED display. Unlike its costlier, analogue-only sibling, it incorporates high-quality D/A conversion, enabling digital sources to be connected directly without an external DAC. It supplies four digital inputs, three line-level analogue inputs, an input for a turntable, wireless connectivity via Bluetooth and a dedicated headphone amp, in addition to its ability when driving loudspeakers.
Digital circuitry
Much effort has been made to ensure the 6000A 19s digital circuitry delivers the level of quality one might expect of a high-performance standalone DAC. As ever, Audiolab has turned to the ES9018 Sabre32 Reference chip family to perform D/A conversion, utilising ESS Technology 19s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range.
No company knows more about making the most of this technically excellent, but challenging, DAC technology than Audiolab. If the circuitry that surrounds the ES9018 is not of sufficient standard, the resulting sound can seem a little cold and hard; treat it right, however, and the level of musical expression that this chip digs from the digital signal is captivating. Audiolab 19s original, universally acclaimed M-DAC was one of the first home audio components to incorporate an ES9018 chip back in 2011, and the company has been honing its implementation ever since.
Analogue circuitry
The 6000A 19s discrete Class AB power amp stage delivers 50W per channel into eight ohms, with a maximum current delivery of 9 Amps into difficult loads. The output stage of the discrete power amp circuits uses a CFB (Complementary Feedback) topology, ensuring superior linearity and excellent thermal stability, as the idle current is kept independent of the temperature of the output transistors.
A substantial 200VA toroidal transformer, followed by 4x15000uF reservoir capacity (60000uF in total), helps the amp to maintain firm control of the music whilst enabling excellent dynamic range.
The preamp section is kept as simple as possible to maintain signal purity, with line input signals passing to a precision analogue volume stage. The latter covers the range from -80dB to +8dB in steps of 2dB and 1dB (step resolution increases with volume position). Much effort has gone into the physical layout of the 6000A 19s circuitry, protecting the sensitive preamp section from noise interference. This, plus the use of independent low-noise power supplies for critical stages, helps to deliver a performance that rivals significantly more expensive analogue amplifiers, even before taking the 6000A 19s impressive digital circuitry into account.
Turntables and headphones
In recognition of the recent vinyl revival, Audiolab has included a phono stage for moving magnet phono cartridges 13 a high-quality, low-noise, JFET-based circuit with precise RIAA equalisation.
Similarly, an increasing number of people are using headphones for music listening, so Audiolab has incorporated a dedicated headphone amp with current-feedback circuitry. Its gain bandwidth and high slew rate ensure a dynamic, detailed and engaging performance with all manner of headphone types 13 more boxes ticked for this most integrated of integrated amplifiers.
Technische Daten:
| Digital Section: | |
| Digital Output Level | 500 +/- 50mVpp |
| Output Impedance | 75 ohm |
| Maximum Resolution | 192kHz/24bit |
| Digital Output | 1 x coaxial , 1 x optical |
| D to A Converter: | |
| Variable Output Voltage | 0 13 2.1V |
| DAC | ES9018K2M |
| Frequency Response | +/-0.5dB(20Hz-20kHz,ref.1kHz) |
| Total Harmonic Distortion (THD) | <0.003% (1kHz @0dBFS , BW=20-20kHz) |
| Signal-to-noise Ratio (S/N) | >115dB(A-weighted) |
| Analogue Output Impedance | 100 ohm |
| Standby Power Consumption | <0.5W |
| Requirements (depending on region) | 220V 14240V~50/60Hz 100V 14120V~50/60Hz |
| Dimensions (LxWxH) | 445 x 313 x 65.5mm |
| Net Weight | 4.9kg |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
-
Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: IAG Group Ltd Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District, Shenzhen, Guangdong, China - marketing@iagmacao.com
Authorized Representative: IAD GmbH, Johann-Georg-Halske-Str. 11, DE-41352 Korschenbroich - service@iad-gmbh.de
