€698.00*
% €1,199.00* (41.78% saved)No longer available
Product information "Audiolab M-ONE v2 Silber"
Gestatten, ich bin der neue M-One! Obwohl ich so klein bin, bin ich ein richtiger Vollverstärker. Ihr könnt zwei analoge und drei digitale Quellen bei mir anschließen. Digital ist besonders toll, denn ich beherberge nahezu den gleichen Chip wie mein Bruder, der M-DAC+. Ich kann also DSD und über den USB-Eingang Signale bis zu 32bit/384kHz verarbeiten. Euer iPad/iPhone lade ich auch auf und einen Kopfhörer könnt ihr ebenfalls bei mir anschließen. Besonders stolz bin ich auf meine Bluetooth Antenne. Musik direkt vom Handy auf die Lautsprecher? Läuft bei mir! Und das wichtigste: Ich klinge richtig gut, denn meine Entwickler haben mir eine echte Class-A/B Endstufe spendiert. Hört mich doch einfach mal an!
Technische Daten:
General description | Integrated Amplifier with Bluetooth |
Sampling Rate | 32-bit / 192kHz (Optical, Coaxial) |
32-bit / 384kHz (USB) | |
2.8MHz (DSD64), 5.6MHz (DSD128), 11.2MHz (DSD256) | |
Input sensitivity | 515mV |
Input impedance | 10K |
Inputs | 1 x USB A for apple devices, 1 x USB B for computer, |
1 x COAX, 1 x OPT, 1 x Bluetooth, 2 x RCA ,1 x headphone | |
12v Trigger | Yes |
Power Output (8 Ohms) | 2 x 40W |
Power Output (4 Ohms) | 2 x 60W |
Frequency response (-3dB) | 10-30kHz |
Total harmonic distortion (THD) | 0.01% |
Signal-to-noise ratio (S/N) | 81 (1W @ 1 kHz) |
Outputs | Speaker Terminal Outputs |
Dimensions | 114mm x 247mm x 292mm |
Net weight | 5.5kg |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: IAG Group Ltd Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District, Shenzhen, Guangdong, China - marketing@iagmacao.com
Authorized Representative: IAD GmbH, Johann-Georg-Halske-Str. 11, DE-41352 Korschenbroich - service@iad-gmbh.de