€3,500.00*
On order - delivery time on request (usually approx. 14 days)**
Product information "Denon PMA-3000NE Silber"
Mit einer Leistung von 160 Watt pro Kanal bei 4 Ohm bzw. 80 Watt bei 8 Ohm versorgt der Denon PMA-3000NE selbst anspruchsvolle Lautsprecher mit spielerischer Leichtigkeit. Entwickelt und hergestellt in den Denon-Werken in Shirakawa, Japan.
- 2 Kanäle
- 160 Watt pro Kanal
- MM/MC-Phono-Vorstufe
- Ultra AL32 Processing
- Optische, koaxiale und USB-Anschlüsse
- Analog-Modus
Mit einem fortschrittlichen Push-Pull-Verstärker, hochentwickelter digitaler Signalverarbeitung und einer robusten Phonostufe gibt der PMA-3000NE Ihre Lieblingsmusik mit Klarheit und Präzision wieder.
Die digitalen Eingänge (optisch, koaxial und USB-B) unterstützen Audiosignale mit bis zu 384 kHz/32 Bit. Die Wellenform-Reproduktionstechnologie Ultra AL32 Processing erzeugt einen weichen, hochauflösenden Sound.
Die Phono-Vorstufe des PMA-3000NE unterstützt sowohl MM- als auch MC-Tonabnehmer und liefert unverfälschten Vinyl-Sound mit jedem Setup.
Der PMA-3000NE liefert 160 Watt pro Kanal bei 4 Ohm bzw. 80 Watt pro Kanal bei 8 Ohm. Dank UHC-MOS Single-Push-Pull-Schaltung und zweistufiger Differentialverstärkerschaltung versorgt er selbst anspruchsvolle Lautsprecher mit außergewöhnlicher Klarheit und Linearität.
Technische Daten
Rated Output Power |
80W + 80W 160W + 160W |
Total Harmonic distortion | 0.01 % (Rated output: –3 dB), 8 ohm/ohms, 1 kHz |
Input Sensitivity: Phono input | MM: 2.5 mV / 47 kohm MC: 200 μV / 100 ohm |
Input Sensitivity:CD/LINE/RECORDER | 135 mV / 19 kohm |
Input Sensitivity: Power Amp input | 0.9V / 47 kohm (EXT. PRE) |
Signal to Noise Ratio | PHONO (MM): 89 dB PHONO (MC): 74 dB CD: 107 dB |
Power Consumption | 400W |
Power Consumption at Standby | 0.2W TV autoplay off 0.4W TV autoplay on |
Power Amplifier Circuit | New UHC-MOS Single Push Pull (7) |
Preamplifier Circuit | Variable Gain Preamplifier (OP AMP) |
Bass / Treble / Mid / Balance Control | Yes / Yes / No / Yes |
Source Direct | Yes |
Analog Amp Mode | Yes (button on front panel) |
DAC Circuit | ES9018K2M × 4 |
Digital Processing | Ultra AL32 Processing |
DAC Master Clock Design,Asyncronous mode (for USB-B input) | Yes |
Phono Input | Yes (MM / MC) *default = MM |
Analog Input (include Phono) / REC Out (RCA) | 4/1 (Gold Plated) (Brass Machining type for all CD/PHONO/AUX/RECORDER) |
Optical input / output (Maximum Support) |
3 / 0 (192 kHz/24-bit) |
Coaxial input / output (Maximum Support) |
1 / 0 (192 kHz/24-bit) |
Speaker Terminal | AVR-A1H type Gold Plated w/Cover |
Headphone Output1 | 1 |
Remote Control,Remote Control Bus Terminal | Yes |
Wi-Fi,HEOS | No |
USB B (USB DAC) | 1 |
PCM Sample Rate / Resolution | ~384 kHz/32-bit |
DSD Audio Streaming | ~11.2MHz |
Unit (W × H × D) | 434 × 182 × 443 mm |
Net Weight | 24.6 kg / 54.2 lbs |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Masimo Corporation, 52 Discovery, Irvine, CA 92618, USA – customerorders@masimo.com
Authorized Representative: Masimo Österreich GmbH, Mariahilfer Straße 136, AT-1150 Wien – info-austria@masimo.com