Product information "Heco Ambient Sub 88 F Satin White"
- Aktivsubwoofer mit 200 mm Mebran und Downfire-Anordnung
- Hochleistungsendstufe in Class-D-Technik
- Aktive Frequenzgangentzerrung
- Aufstellung stehend oder liegend möglich
- Bei stehender Montage ist eine Wandarretierung möglich
- Ausführung: Schwarz seidenmatt und weiß seidenmatt
Als Abrundung zu den eleganten Wandlautsprechern liefert der aktive Subwoofer Ambient 88F mit seiner Hochleistungsendstufe in Class-D-Technik satte Sounds bis hinunter zu einer Grenzfrequenz von 24 Hz. Trotzdem ist der mit einem 200 mm Chassis arbeitende Tieftöner ultrakompakt und gerade mal 16 cm tief. Damit passt er nahezu überall neben oder unter ein Möbelstück oder auch mal hinter den Vorhang. Lautstärke und Übergangsfrequenz sind mit den Bedienelementen auf der Unterseite stufenlos regelbar. Auch den 88F gibt es in seidenmattem und somit unempfindlichem Schwarz oder Weiß, man muss ihn also nicht unbedingt verstecken. Der Tieftöner selbst strahlt nach unten ab, die Bassreflexöffnungen zur Front oder Seite, je nach Aufstellung.
- Hochwertige Seidenmattlack-Ausführung
- Das extrem flache Gehäusedesign und das in die Unterseite integrierte Bedienfeld gewährleisten universelle Aufstellung liegend oder stehend
- Sehr stabil konstruiertes Gehäuse aus MDF
- Hochdämpfende Silikon-Standfu¨ße
- Vorbereitung zur Wand-Arretierung bei stehender Aufstellung
- Sehr stabil konstruiertes Gehäuse, aus sich gegenseitig stabilisierenden MDF-Platten zusammengefügt
- High-Power Langhubwoofer mit gehärteter Papiermembran, hochbelastbarer Schwingspule und kräftigem Ferrit-Magnetsystem
- Bassreflexkonstruktion mit zwei beidseitig strömungsoptimierten Reflexrohren
- Woofer in Down-Fire-Anordnung
Technische Daten
Prinzip | Aktiver Kompakt-Subwoofer |
Frequenzbereich | 24 - 150 Hz |
Trennfrequenz | 50 – 150 Hz, regelbar |
Belastbarkeit (RMS/max.) | 125 / 250 Watt |
Maße (BxHxT) | 380 x 160 x 500 mm |
Gewicht | 9kg |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them.
- Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Avoid operating speakers at maximum volume for long periods of time to avoid hearing damage and equipment damage.
- Make sure speaker cables are routed securely and do not pose a tripping hazard. Use cable ducts or ties.
- Keep speakers away from water and moisture to prevent damage and short circuits.
- Place speakers in a stable position and make sure they cannot tip over or fall.
- Only use speakers in the environment they are intended for. Outdoors, only use speakers that are specifically designed for outdoor use to avoid weather and water damage.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Klipsch Group Inc., 3502 Woodview Trace, Indianapolis, IN, USA – https://www.klipsch.com/de/contact-us
Authorized Representative: Klipsch Group Europe B.V., Kapteynstraat 1, NL-2201 BB, Noordwijk - https://www.klipsch.com/de/contact-us