Musical Fidelity M2scd silber
€799.00*
% €999.00* (20.02% saved)In stock - ready for immediate dispatch
Buy together with
Product information "Musical Fidelity M2scd silber"
Like the matching M2si integrated amplifier, the M2scd is designed as serious hi-fi available at a modest price. From the fine fit and finish of its metal casework to the unique technology sitting inside, the M2scd exceeds expectations. The M2scd builds on our years of engineering expertise, uniquely featuring both a mains choke filter and a high-tech digitalstream noise filter. Such innovations enable the player to deliver technical performance; it boasts low distortion and a virtually flat frequency response, plus minimal noise and jitter.
The M2scd's DAC design also draws from its high-end siblings, using cutting-edge technology to ensure excellent data recovery from your discs. Simply put, that means you'll hear more from your music. Reviews say "a very mature and polished performer", which "sounds refined and elegant".
- Output
Output impedance: 50 ohms
Output, digital 0dB level: RCA output - 2.2V r.m.s. nominal
- DAC
DAC circuit: 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Total correlated jitter: <135 picoseconds peak to peak
Linearity: <0.1dB down to -96dB
Frequency response: 10Hz to 20 kHz -0.2dB max.
Channel separation: >105dB 20 Hz to 20 kHz
Signal-to-noise ratio: >117dB 1Ca 1D- wtd.
Total harmonic distortion: <0.003% 10Hz to 20 kHz
- Connections
Line level outputs: 1 pair line level RCA connectors, left and right outputs
Digital outputs: 1 RCA coaxial connector SPDIF, 1 TOSLINK optical connector
- Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 20 Watts maximum
- Weight
Unit only, unboxed 6.65 kg
In shipping carton 10.5 kg
- Dimensions
Wide 440 mm
High, including feet 100 mm
Deep (front to back) including terminals 375 mm
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
