€659.00*
% €899.00* (26.7% saved)In stock - ready for immediate dispatch
Product information "Musical Fidelity MX VYNL schwarz"
The MX-VINYL is a fully balanced, very high performance phono stage, able to operate with virtually any moving coil or moving magnet cartridge. With both traditional RCA inputs and our unique XLR fully balanced connection the MX-VYNL can be connected to 2 turntables simultaneously.
The MX-VINYL offers a wide range of input impedance settings for moving coil cartridges as well as several capacitance settings for moving magnet units. Unlike many of our competitors units the MX-VYNL allows easy adjustment of these settings while playing. This allows easy experimentation and tuning to find the optimum setting for all your equipment.
The MX-VINYL also includes our renowned RIAA correction that offers extremely accurate results to beyond 80kHz. That may sound extreme, but there is a good deal of information above 20 kHz that needs correction. If it isn 19t corrected, it will show itself as ringing and overshoot.
With both extraordinarily low noise and exceptional overload margin the MX-VINYL can comfortably handle even the most demanding of cartridges and satisfy the most discerning of listeners.
MX-VINYL in brief
- Fully balanced XLR and traditional RCA inputs
- Fully balanced XLR and traditional RCA outputs
- Fully isolated inputs allow for switching between two turntables at once
- Adjustable input impedance on MC whilst it is playing
- Adjustable capacitance on MM whilst it is playing
- Very wide overload margin
- Accurate RIAA to beyond 80kHz
- Incredible noise ratio
- Low impedance output
- State of the art SMD technology
- Beautiful aesthetics and build quality
Output
- 4 Volts RMS single ended from RCA sockets
- 8 Volts RMS balanced from XLR sockets
Performance
- Frequency response: RIAA ±0.1dB IEC ±0.1dB
MM:
- Channel separation: < -86dB
- SNR A-wtd: < -101dB
- THD: < 0.007%
- XLR input: 5mV / 2.5mV selectable
- 70mV max (23dB headroom)
MC:
- Channel separation: < -83dB
- SNR A-wtd: < -98dB
- THD: < 0.01%
- XLR input: 0.8mV / 0.4mV selectable, 12mV max (24dB headroom)
Inputs
- Balanced Mini-XLR
- RCA 1 pair RCA sockets
Outputs
- Balanced XLR male sockets EIA Standard RS-297-A
- RCA 1 pair RCA sockets
Power
- Connector: 1.3mm pin DC power jack
- Outboard power supply: 12V/500mA DC
- Mains voltages 100-240VAC 50-60Hz universal worldwide supply
- Consumption < 8 watts
Weight
- Weight (unpacked / packed): 1.9Kg / 2.4 Kg
Dimensions
- Width 220 mm
- Height (including feet) 53 mm
- Depth (front to back) 215 mm
Included accessories
- Mains adaptor
- Manual
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
-
Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Musical Fidelity a Division of Audio Tuning Vertriebs GmbH, Margaretenstraße 98, AT-1150 Wien - info@musicalfidelity.com