€129.00*
% €149.00* (13.42% saved)In stock - ready for immediate dispatch
Product information "NAD PP2e"
Der Phono-Vorverstärker PP2e bietet hervorragenden Klang, eine einfache Inbetriebnahme und ein sehr gutes Preis-/Leistungsverhältnis. Er kann mit MM oder MC Tonabnehmersysteme verwendet werden, die Einstellung erfolgt über einen Schalter auf der Rückseite. Im Inneren des PP2e haben die NAD Entwickler den gleichen Aufwand getrieben wie bei den legendären NAD Verstärkern: stabile Stromversorgung über ein externes 24 V/100 mA Netzteil, hochwertige klangoptimierte Bauteile, ein solides Metallgehäuse und stabile, vergoldete Anschlüsse. Ein Masseanschluss am Gehäuse ermöglicht die direkte Verbindung mit dem Plattenspieler. Die neue Ausschaltautomatik gewährleistet, dass sich der PP2e nach wenigen Minuten in den Standby-Modus schaltet, wenn einige Minuten kein Musiksignal anliegt.
- Für MM/MC Tonabnehmersysteme
- Vergoldete Anschlussbuchsen
- Selektierte Bauteile
- Ausschaltautomatik
Technische Daten
Eingangsimpedanz (R und C) - MC / MM | 100 Ohm + 180 pF / 47 kOhm + 200 pF |
Verstärkung bei 1 kHz - MC / MM |
60 dB / 35 dB |
Eingangsempfindlichkeit (bei 200 mV Ausgangssignal) - MC / MM | 0,3 mV / 2,5 mV |
Geräuschspannungsabstand (A-gewichtet mit angeschlossenem Tonabnehmer) - MC / MM | 78 dB / 80 dB |
Ausgangsimpedanz | 100 Ohm |
Maximaler Ausgangspegel | 5,3 V |
Abmessungen ohne Netzteil (B x H x T) | 135 x 49 x 72 mm |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
-
Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Lenbrook International, 633 Granite Court, Pickering ON L1W 3K1, Canada - support@nadelectronics.com
Authorized Representative: Ludoma Services BV, Gesworenshoekseweg 4, NL-5047 TM Tilburg - info@ludomaservices.com