€699.00*
% €799.00* (12.52% saved)In stock - ready for immediate dispatch
Product information "Pro-Ject Tube Box DS2 Silber"
Premium-Phonovorstufe mit Röhrenbestückung und Highend-Klangqualität!
Dieser hochpräzise Röhren-Preamp profitiert von der ausgefeilten Schaltungstopologie des Dr. Sykora und beinhaltet nur beste Komponenten. Die Vorstufe ist sowohl für MM als auch MC Tonabnehmer geeignet. Als Besonderheit bietet sie nicht nur die Anschlussmöglichkeit für 2 Plattenspieler und 2 Line-Ausgänge sondern auch eine stufenlos anpassbare Eingangsimpedanz für MC-Tonabnehmer mit niedriger Ausgangsspannung, welche sogar während der laufenden Plattenwiedergabe angepasst werden kann! Für MM-Abtaster besteht die Möglichkeit die Eingangskapazitäten individuell zu verändern, ein schaltbarer Subsonikfilter hält tieffrequente Störgeräusche unterhalb von 20Hz von Verstärkern und Lautsprechern fern. Alle verwendeten Baugruppen, wie Röhren und Polypropylenkondensatoren sind nach audiophilen Gesichtspunkten gewählt und garantieren atemberaubende Klangerfahrung. Ein perfektes Upgrade für ambitionierte Vinylliebhaber!
- Geeignet für MM und MC Tonabnehmer
- Präzise RIAA-Entzerrung
- Ultra rauscharme Schaltung
- Auswahl zwischen 2 Phonoeingängen & 2 Lineausgängen
- Dual-Mono Auslegung für optimale Kanaltrennung
- Wählbare Eingangsimpedanz (für MC: fix oder variabel)
- Wählbare Eingangskapazität (für MM)
- Schaltbarer Subsonikfilter
- Hartvergoldete RCA Ein-/Ausgangsbuchsen
- Sandwichgehäuse Alu/Metall schützt vor Vibrationen und elektromagnetischen Einstreuungen
- Ausführungen: Silber oder schwarz mit oder ohne Holzseiten (Eucalytus, Rosenut, Walnuss)
Röhrenbestückung | 2x ECC83 (12AX7) |
Eingangsimpedanz | variabel 10-1000 Ohm, fix 47 kOhm |
Eingangskapazität | 100 / 220 / 320 pF |
Verstärkung MM / MC | 40 / 45 / 50 / 60 / 65 dB |
Ausgangsspannung typisch | 500 mV/1kHz bei 5mV/1kHz (bei 40dB) |
Geräuschspannungsabstand | 88dBA |
THD | < 0,04% |
RIAA Abweichung | +/- 0,2dB/20Hz - 20kHz |
Subsonikfilter | 20Hz @ 18dB/octave |
Eingänge / Ausgänge | je 2x RCA |
Netzteil | 18V/1000mA DC |
Leistungsaufnahme | max 490mA DC / < 0,5 Watt Standby |
Abmessungen (B x H x T) | 206 x 91 x 227 mm |
Gewicht | 1650g |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
-
Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Audio Tuning Vertriebs GmbH, Pro-Ject Headquarter, Wirtschaftspark A5, Analogweg 1, AT-2130 Mistelbach - support@project-audio.com